Daily Archives: 2005/03/31

This story doesn’t involve Wally to any large extent, but it describes Wally’s willingness to stretch the envelope.

The Beach Boys were headed for the Honolulu International Center (HIC) in Hawaii, and they hired Heider Recording to record the performances. This was to be the first double 8-track remote, two machines running together, making redundant recordings with a slight overlap so that nothing got lost. The 8-track 1″ format was still fairly new, and not many people had two machines that they could send out on a remote, but Wally had two 3M Model 23 8-tracks ready for the job.

What Wally didn’t have was an 8-bus console to feed the 8-track machines. Frank DeMedio was working on an 8-bus console that would eventually be used in Wally’s Studio 3, but it wasn’t finished.

Wally invited me to travel to Hawaii as the tech, accompanying Bill Halverson on the job. I guess he figured I knew the tape machines inside out, and I could probably figure out any console problems. To help me become familiar with the console, he suggested that I visit Frank’s home, where Frank and his Dad were building the console, sometime prior to the trip for a familiarization by Frank. That sounded like a good plan.

Time went by and there was no familiarization trip. Finally, time ran out, and the night before the trip I went over to Frank’s place. What I found was only the pieces of a console. I asked if there was anything that I could do to help, but Frank suggested that I just make myself comfortable for a while as they finished up. That was maybe around 7:00 p.m.

Since the console was due to be loaded onto a pallet at the airport around 10:00 a.m. the following morning, I assumed that things were under control and I would soon be able to get a rundown. By about 9:00 p.m. I was starting to get concerned. Things were still scattered around the room. My offer to help once again was refused.

Read more »

I guess it takes a lot of energy to keep a hyperactive giant running. Wally certainly enjoyed eating to keep the fires stoked.

I remember John’s Kingburger, a sidewalk hamburger shack directly across Vine Street from the Capitol tower. John was a very quiet guy who lived with his dog(s?) and made on Hell of a hamburger. The meat patty wasn’t thick, but it was made from fresh meat, formed large enough to cover the large buns John used. John used lots of seasoning to bring out the flavor of the meat. The real crowning glory of his hamburgers was the trimmings. He would stack up lots of lettuce leaves, slices from big beefsteak tomatoes and beautiful slices of large onions. I think John would pick up his daily supply of vegetables from the L.A. Produce Market each morning. My mouth waters just describing those masterpieces. Pardon me while I wipe the drool off my chin!

Lunch for Wally was two of John’s burgers, and then at least one chilidog for dessert.

Once when I was visiting L.A. during my 2-year stint at New Mexico State University’s graduate school (1969-1971), I stopped at John’s stand just as I was leaving town in my Volkswagen to drive back to New Mexico. I can remember how proud I was that first time that I was actually able to finish off 2 Kingburgers, but I certainly couldn’t handle a chilidog chaser. I also bought an extra burger to take to my girlfriend back home. On my straight-through drive to New Mexico of about 800 miles there were several times when my girlfriend almost lost her opportunity to see her first Kingburger. I did manage to deliver the burger intact, and she ate it and enjoyed it very much.

Read more »

Wally’s First 3M 8-Track

Wally Heider was always willing to play a hunch. If he thought something new could be successful, he was willing to be the first one on the block with the new toy. One of his hunches was to buy the first 3M Isoloop 8-track recorder ever delivered. That hunch paid off immediately.

Wally’s 8-track was among the first 3 machines to be hand-built by the design team at 3M Mincom. The other two machines consisted of a 1/2″ 2-channel Dynatrack-only machine delivered to Ross Ritchie at the Marine Band in Washington, and a 1/2″/1″ 4-track shipped to Rolf Epstein at the Film Board of Canada.

Wally’s machine was unique. During the design process for the second-generation NAB/Dynatrack machine, a design company, Ford and Earl Associates of Troy, Michigan, was commissioned to come up with the industrial design of the machine and mounting cabinet. One of their first questions was “Can’t we get rid of that terrible buff color on those meters?” Well, they certainly lost that battle, but the console design was very impressive. The machine was mounted in a walnut grained cabinet using contoured sheetmetal and Heliarced wraparounds. The cabinet was mounted on a bird-foot pedestal with 4 casters – similar to a desk chair.

Unfortunately, after the first two prototypes of the console were built, that technique was way too expensive. The compound rolled corners and Heliarced aluminum were completely overbudget. The console was redesigned with flat sheetmetal pieces and a deeper (horizontally) wooden box that brought the lower electronics modules forward for better viewing and access.

Read more »